|
StudSensor SL
finds the edges of
studs and joists up to 3/4 inches (19 mm) deep.
StudSensor™
SL shines a bright beam of light when it finds the edges of
studs and joists up to 3/4 inches
(19 mm) deep.
TruCal technology
provides instant and accurate one-touch calibration each
time StudSensor™ is used, automatically adjusting to the
density and thickness of your particular wall. When the
TruCal® LED lights up on the right side of the sensing head,
calibration is complete.
The exclusive patented SpotLite® Pointing System shines a
bright beam of light when you find a stud edge.
Key Features
- Finds both wood and
metal studs
- SpotLite® Pointing
System
- Bright LEDs and
audio indicator
- Ergonomic
shape to fit in your hand
- Tough for jobsite
use
Applications
Find the edges of wood
or metal studs or joists to:
- Hang cabinets and shelves
- Hang pictures and mirrors
- Install ceiling fans and
chandeliers
- Install drapery rods and closet
organizers
- Install plant hangers, towel bars,
etc
The ZIRCON
Advantage
- Uses a patented sensor that
pinpoints the edges of wood or metal studs behind walls,
floors, or ceilings.
- Exclusive, patented SpotLite
Pointing System shines a bright beam of light over stud
edges.
- Bright LEDs and an audio signal
indicate stud edges.
- A new,
patented, ergonomic shape and pocket clip for a smaller,
user-friendly profile.
- Made to withstand daily jobsite
use.
Technical
Information
|
Dimensions |
5.54 in. H x 2.33 in. W x 1.18 in. D
(141 mm x 59 mm x 30 mm) |
|
Weight |
3.6 oz. (102 g) without
battery |
|
Battery type |
9-V alkaline (included) |
|
Estimated battery life |
1 year at 10 minutes per day
with alkaline battery |
|
Position accuracy |
Typically within 1/8 in. (3 mm) using the dual scan and
mark procedure |
|
Depth |
Typically up to 3/4 in. (19
mm)
NOTE: Sensing depth and edge detection can vary
due to moisture content of materials, wall texture,
paint, etc. |
|
Operating temperature |
20° to 120°F (-7° to 49°C) |
|
Storage temperature |
-20° to 150°F (-29° to 66°C) |
|
Humidity |
80% RH (noncondensing) |
|
Water resistance |
Splash and water resistant,
not waterproof |
|