 TriScanner
OneStep
Finds the center of studs
in one pass!
Revolutionary
CenterVision™ technology pinpoints the stud
center, not just the edge.
TriScanner® OneStep™ is a four-function scanner
with the patented SpotLite® Pointing System and rubberized
grip.
TriScanner® OneStep™ finds the
center and edges of studs and joists, finds copper (and
other non-ferrous metal) pipes up to 1-1/2 inches (38 mm)
deep, and finds rebar (ferrous metal) in concrete up to 3
inches (76 mm) deep, while continuously detecting hot
unshielded AC wires.
Stud Scan Mode
TriScanner® OneStep™ finds the edges of studs and joists up
to 3/4 inches (19 mm) deep in normal mode.
Stud DeepScan® Mode
In Zircon's patented DeepScan® mode, TriScanner OneStep™ can
find studs up to 1-1/2 inches (38 mm) deep behind drywall,
paneling, or plywood.
Metal Scan Mode
Finds copper and other non-ferrous metal up to
1-1/2 inches (38 mm) deep.
Finds ferrous metal such as rebar in concrete up to
3 inches (76 mm) deep.
AC WireWarning™
Continuously detects hot unshielded AC wiring—an important
safety feature.
 Key Features
-
Exclusive—finds the stud center
- Finds both
wood and metal studs
- Constant hot
AC WireWarning™ in all modes for safety
- Patented
SpotLite® Pointing System
- Patented
DeepScan® dual sensitivity scanning
- Metal scan
for finding pipes, nails, rebar, and other hidden metals
Applications
Find the center and edges of wood
or metal studs or joists to:
- Hang
cabinets, pictures, mirrors, and shelves securely
- Install
ceiling fans, grab bars, and chandeliers
- Find metal
pipes behind tile and in concrete
- Find
conduit, rebar, electrical boxes, exhaust vents, and
ducting
- Detect hot
electricity behind walls, floors, and ceilings
- Avoid
cutting or drilling into piping or electrical lines
The ZIRCON
Advantage
-
Patent-pending CenterVision™ technology finds the stud
center in one step.
- Uses a
patented sensor to pinpoint the center and edges of wood
or metal studs behind walls, floors, or ceilings.
- Exclusive,
patented SpotLite Pointing System shines a bright beam of
light over target center.
- Metal-only
setting looks specifically for metal pipes or rebar.
- AC
WireWarning™ is active in all modes for safety.
- Patented
dual-sensitivity scanning—normal up to 3/4 inch (19 mm) or
DeepScan up to 1-1/2 inches (38 mm) — through drywall,
paneling or plywood, or a combination of them, and through
most bare wood flooring.
Technical
Information
|
Dimensions |
6.32 in. H x 3.13 in. W x
1.27 in. D
(161 mm x 80 mm x 32 mm) |
|
Weight |
6.5 oz. (184 g) without battery |
|
Battery type |
9-V alkaline (not included) |
|
Estimated battery life |
2 years at 10 minutes per day
with alkaline battery |
|
Position accuracy |
Stud Scan mode: typically
within 1/8 in. using the dual scan and mark procedure
DeepScan mode: typically within 3/16 in. using the same
procedure
Metal Scan mode: typically within 1/2 in. (13 mm) |
|
Detection Depth |
Up to 3/4 in. in Stud Scan
mode
Up to 1-1/2 in. in DeepScan mode
Up to 1-1/2 in. for copper in Metal Scan mode
Up to 3 in. for rebar in Metal Scan mode
NOTE: Sensing depth and edge detection can vary
due to moisture content of materials, wall texture,
paint, etc. |
|
AC Position Accuracy |
Typically 90–250 V at 50–60
Hz laterally within 12 in. (150 mm) of a hot unshielded
wire |
|
AC Sensing Depth |
Typical depth of 2 in. (50
mm) |
|
Operating temperature |
20° to 120°F (-7° to 49°C) |
|
Storage temperature |
-20° to 150°F (-29° to 66°C) |
|
Humidity |
80% RH (noncondensing) |
|
Water resistance |
Splash and water resistant,
not waterproof |
|
Order online: Add your item to your shopping cart and
submit your order online*.
Order
offline: Add your item to your shopping cart and print an
offline order form*. Mail or fax your order to us 
